SHOP WITH CONFIDENCE
TOP QUALITY, NICOSIL LINED, ALLOY, HIGH PERFORMANCE CYLINDER KIT.
MUGELLO 200CC PISTON PORTED KIT FOR LARGE BLOCK ENGINES
The Mugello Brand was designed, developed and produced in Italy by Tino Sacchi, and is still one of the best performance kits available for Lambretta's. The advantages of this kit are that it is pretty much a bolt on kit, and can be used with various carbs and exhausts. Designed to run on the 58 x 107 standard crank set up.
SUITABLE FOR ALL LAMBRETTA MODELS WITH LARGE BLOCK ENGINES 200cc, stud spacings.
SERIES 1,2 3 & GP MODELS - LI SX GP
Kit consists of:
Alloy cylinder head, with 7 bolt fixing positions. 4 standard cylinder studs and 3 extra M7 bolts
Alloy cylinder nicosil lined, this is the latest version with bridged transfer and inlet manifold ports.
Piston kit with extra hunter port, piston rings, gudgeon pin and circlips
Inlet manifold gasket
Exhaust manifold gasket
Exhaust manifold studs, washers and brass nuts
3 x M7 extra cylinder head bolts and washers.
3 x base gasket of different thickness's so the squish can be calibrated exactly.
We recomend re jetting the carb and using a clubman type or similar performance exhaust .
We also recomend that the Crank and Bearings are at least checked, before fitting, as the originals will be at least 50 plus years old
We have run the 185 version of this kit on one of our own scooters, for over 10 years now, (fitted in 2009) and it is still going strong, it cruises happily at 55mph and will reach close to 70mph if required, the set up on this scooter is.
22mm delorto carb through the airbox
Clubman 42mm exhaust
Li 150 Special Spanish gearbox
17 x 46 sprokets with 81 link chain
Meceur Tameni GP Crank